CF100 - 2 Part Epoxy Crack Repair - 2 Gallon Kit
-
$209.93
Videos and Instructions
FREQUENTLY ASKED QUESTIONS
Large Project? Get a Quote Here
CF100 is a two-component, 100% solids epoxy crack repair system designed for shallow repairs on vertical or horizontal concrete and masonry surfaces. With its easy 1:1 by volume mix ratio and high-build capability, CF100 provides excellent adhesion, durability, and long-term performance. Ideal for hairline cracks up to 1/8", surface spalls, and small voids prior to coating or returning the surface to service.
Product Storage
Store product at 60–90°F. Keep at normal room temperature before use. Low temperatures or fluctuations may cause crystallization.
Surface Preparation
Substrate must be clean, dry, and free of dirt, oil, or laitance. To test dryness, tape a 4'×4' plastic sheet to the surface for 24 hrs; if no moisture is present, substrate is acceptable. For cracks up to 1/8", remove all unsound concrete and vacuum debris.
Product Mixing
Mix 1 part A to 1 part B by volume. Use low-speed equipment (jiffy mixer, putty knife, or spatula) until uniform in color. Mix only what can be used within pot life. Improper mixing may result in product failure.
Priming
No primer required.
Product Application
Apply mixed material with a margin trowel, putty knife, or suitable tool.
Recoat / Topcoating
For cracks <1/8", many epoxies can be applied directly over uncured CF100. Alternatively, allow to cure before coating. If a whitish amine blush appears, wash with detergent before topcoating. Compatible with epoxy, urethane, and multiple CF100 layers.
Cleanup
Clean tools with xylol immediately after use.
Floor Cleaning
Some cleaners may affect color. Test in a small area before full cleaning. If safe, continue using that cleaner and process.
Restrictions
Restrict to light traffic and non-harsh chemicals until fully cured (see Technical Data). Keep floor dry during cure. Surface may be slippery when wet or contaminated—maintain a clean, dry surface.