New Year Sale EXTENDED! Ends 1-25-23! Large Project? Request a Quote.
  • HDSB - Solvent Based Epoxy Coating

HDSB - Solvent Based Epoxy Coating

HDSB is a two component solvent based epoxy coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, and substrate penetration.  This product is suitable as a primer for high build coatings, urethane or as a ...
  • $0.00

Customise your product

Available Options

HDSB is a two component solvent based epoxy coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, and substrate penetration.  This product is suitable as a primer for high build coatings, urethane or as a stand-alone coating. Coverage: 267 to 320 sq ft per gallon depending on the porosity of substrate.

RECOMMENDED FOR: Recommended priming or coating concrete, wood or steel.  This product can withstand exposure too many common solvents and chemicals. 

Cure Schedule: 70 degrees:
Pot Life - 2 gallon volume: 3 to 5 hours
Tack Free / Dry to Touch): 2 to 4 hours
Recoat / Topcoat: 4 to 6 hours 

Light Foot Traffic: 16 to 24 hours

Full Cure: 2 to 7 days

Application Temperature: 40-90°F


SOLIDS BY WEIGHT: Mixed= 65% (+, - 2%)
SOLIDS BY VOLUME: Mixed= 52% (+, - 2%)
VOLATILE ORGANIC CONTENT:
Part A= 3.43 pounds per gallon/Part B= 3.75
pounds per gallon
VOC mixed < 427 g/l
STANDARD COLORS: White, off white, light gray, medium gray, tile red, and beige.
RECOMMENDED FILM THICKNESS: 5- 6 mils per coat wet thickness (yields 3 mils dry)
COVERAGE PER GALLON: 267 to 320 square feet @ 5-6 mils wet thickness
PACKAGING INFORMATION: Quart, 2 gallon and 10 gallon kits (volume approx.),
2 gal kit= 1 gallon part A (8.5#/gal) (weights ap proximate) and 1 gal. Part B (11.0#/gal)
(weights approximate)
MIX RATIO: 1 part A to 1 part B by volume
SHELF LIFE: 1 year
FINISH CHARACTERISTICS: Satin gloss (30-60 at 60 degrees @ glossmeter)
ABRASION RESISTANCE: Taber abrasor CS-17 calibrase wheel with 1000 gram total load and 500 cycles = 30.2 mg loss
IMPACT RESISTANCE: Gardner Impact, direct= 50 in. lb. (passed)
FLEXIBILITY: No cracks on a 1/8” mandrel
ADHESION: 375 psi @ elcometer
(Concrete failure, no delamination)
VISCOSITY: Mixed = 300-500 cps (typical)
DOT CLASSIFICATIONS:
Part A “FLAMMABLE LIQUID N.O.S., 3, UN1993, P GIII”
Part B “FLAMMABLE LIQUID N.O.S., 3, UN1993, P GIII”
PRIMER: None required
TOPCOAT: Optional, Many products are suitable as topcoats including multiple coats of this product. For added chemical resistance, color stability or UV stability, topcoat with a suitable aliphatic urethane such as HPU, TC92, HDI, PC66, HP44, and many more. Ask a Spartan Epoxies Coatings Expert for additional information.

Polymer Coatings Color Chart

Tags: Primer