Industrial Floors

Sort By:

Show:

Showing 1 to 25 of 40 (2 Pages)

00 Sand / 50lb Bag

$11.99

00 Sand / Broadcasting Aggregate for high impact industrial epoxy flooring. Broadcast into HD Pro, Pro100, or any of our other suitable epoxy systems to achieve a high impact, industrial grade system. To figure how many pounds you need for a shop floor, commercial kitchen, warehouse, or a high wear ..

Ardex GS-4 Self-Leveling Underlayment for Gypsum & Wood Subfloors, 50 lb. Bag

$46.25

A self-leveling underlayment used to smooth and repair an existing gypsum substrate that is otherwise unsuitable to receive new finish flooring. Use this product to install our metallic epoxy system! Product Capabilities: ARDEX GS-4 is intended for use as a remedial material for distressed gy..

Ardex Liquid BackerBoard Self-Leveling Underlayment, 50 lb. Bag

$45.99

ARDEX Liquid BackerBoard replaces traditional bulky, time consuming and expensive hard backer board by providing a flatter, smoother and more durable surface….and provides a more efficient and less expensive installation overall. Save time, money and hassle with ARDEX Liquid BackerBoard. No more ..

Flexible Broadcast Epoxy - SPE-FLEX

$0.00

SPE-FLEX / Flexible Broadcast Primer is a two-component 100% solids epoxy designed for sealing traffic surfaces exposed to vehicular or foot traffic. The toughness and elongation eliminate the need to repair hairline cracks. This product is formulated for use in a broadcast system as the..

HD WB - FAST SET / Waterborne Epoxy Primer

$0.00

229 sq. ft./gal to 320 sq ft per gallon @ 5 to 7 mils. Yields 2-3.5 mils dry thickness. HD-WB-FS is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. HD-WB-FS has good chemical resistance, abrasion resistance, and su..

Industrial Floor Epoxy System 10k FT² +

$11,751.00

This kit includes 75 gallons of HD Pro - (1/2 drum kit) 1 - 50 Gallon Drum Part A and 25 Gallons of Part B. It also includes 31.50 Gallons of HPU - High Performance Urethane. Our industrial floor system includes HD Pro our high solids system. 2 coats of HPU High Performance Urethane is al..

Industrial Floor System

$0.00

Configure your own epoxy floor with this product. For example, if you have a warehouse that runs skid loaders on with solid rubber tires, you will either need a high solids urethane, or just HDWB, then apply PRO100 at 125 sq ft per gallon @ 13 mils. That is considered a thin mil system but very dura..

NOVO-PRIME - Novolac Primer

$0.00

NOVO-PRIME is a two component pigmented novolac epoxy primer. NOVO-PRIME offers high solids, good substrate penetration and low odor. This primer reduces air release generation from the substrate when applying higher solids novolac topcoats (NOVO-TEK). This will result in fewe..

NOVO-TEK - Novolac Sealer

$0.00

NOVO-TEK is a two component colored high solids novolac epoxy coating designed for application where splash and spills of acids, chemicals, and solvents occur. Recommended for a high build topcoat for traffic areas, chemical troughs and curbs as well as tanks and chemical spill areas for cement..

NOVO-TEK-V - Novolac Vertical Top Coat Sealer

$0.00

NOVO-TEK - V Wall coating is a two component colored high solids novolac epoxy coating designed for application where splash and spills of acids, chemicals, and solvents occur. Recommended for a high build topcoat for traffic areas, chemical troughs and curbs as well as tanks and chemical spill..

SPE-HD-WB - Primer / Base - 1 Gallon Kit

$85.25

267 sq. ft./gal @ 6 mils - SPE-HD-WB is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. SPE-HD-WB has superb chemical resistance, abrasion resistance, and substrate penetration. Recommended for priming or coating concrete, wood ..

SPE-HD-WB - Primer / Base - Sample Kit

$30.00

WBSL - Water Based Urethane Slurry

$0.00

WBLS is a bio-based 3 or 4 component (dependent on color) urethane slurry that has outstanding wear performance and can withstand higher heat exposures than typical unmodified urethanes. The product has good thermal shock capabilities and is a good choice for hot wash down areas. The product is resi..

HD WB-V - Primer / Base - Vertical - 1 Gallon Kit

$85.65

HD WB-V is a two component water based epoxy coating that exhibits chemical resistance and abrasion resistance rivaling solvent based products. Specifically designed for vertical applications up to 8 mils per coat without sagging. Covers 267 sq. ft. (267 sq. ft./gal @ 6 mils RECOMMENDED FO..

Sale!

SPE-HD-WB - Primer / Base - 2 Gallon Kit

$151.11 $167.11

Covers 534 sq. ft. (267 sq. ft./gal @ 6 mils) - SPE-HD-WB is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. SPE-HD-WB has superb chemical resistance, abrasion resistance, and substrate penetration. Recommended for priming or co..

HD WB - FAST SET / SAMPLE KIT

$38.99

SAMPLE / QUART KIT - 229 sq. ft./gal to 320 sq ft per gallon @ 5 to 7 mils. Yields 2-3.5 mils dry thickness. HD-WB-FS is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. HD-WB-FS has good chemical resistance, abrasi..

HD WB-V - Primer / Base - Vertical - 2 Gallon Kit

$162.11

HD WB-V is a two component water based epoxy coating that exhibits chemical resistance and abrasion resistance rivaling solvent based products. Specifically designed for vertical applications up to 8 mils per coat without sagging. Covers 534 sq. ft. (267 sq. ft./gal @ 6 mils RECOMMENDED FO..

SPE-HD-WB - Primer / Base - 5 Gallon Kit

$368.00

Covers 1335 sq. ft. (267 sq. ft./gal @ 6 mils) - SPE-HD-WB is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. SPE-HD-WB has superb chemical resistance, abrasion resistance, and substrate penetration. Recommended for priming or c..

Sale!

HD-PRO - High Solids Primer / Base - 3 Gallon CRADLE KIT

$214.99 $265.15

Cradle Kits / Batch Kits are the installers choice for faster mixing, and job turnaround time. 2 Gallons of Part A is at the bottom and 1 Gallon Part B is cradled inside (Batch kits are essentially the same but you will get the 3 gallon kit in a box, with Part B outside of the bucket.). HD-PRO ..

Sale!

HD-PRO - High Solids Primer / Base - 3 Gallon KIT

$255.99 $270.15

HD-PRO (SPE-HD-PRO) is a two component 93% (+/- 1%) solids epoxy colored coating designed for applications where a high solids primer is needed before applying high solids or 100% solids topcoats for build coats over concrete. Recommended for a high build basecoat on concrete or mason..

Sale!

HDPRO - High Build Primer / Base - 1.5 Gallon Kit

$125.00 $156.00

1.5 Gallon Kit of HD PRO (SPE-HD-PRO) will cover 199.5 sq ft - 400.5 sq ft. (133-267 sq ft/gal @ 6-12 mils). HD PRO is a two component 93% (+/- 1%) solids epoxy colored coating designed for applications where a high solids primer/base epoxy is needed before applying high build epoxy ..

HDWB - Primer / 1 GALLON PART B

$101.50

HDWB 1 GALLON - PART B ONLY for a 5 Gallon kit. ..

HDWB - Primer / Base / CLEAR - 5 Gallon Kit

$294.62

This is CLEAR HDWB ONLY. Covers 1335 sq. ft. (267 sq. ft./gal @ 6 mils) - SPE-HD-WB is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. SPE-HD-WB has superb chemical resistance, abrasion resistance, and substrate penetration. Rec..

Sale!

PRO100 - High Build 100% Epoxy - 1.5 Gallon Kit

$125.00 $155.00

PRO100 is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed. Recommended for a high build topcoat or basecoat on concrete or masonry. Product is suitable in many chemical exposure environments. This 1...

Sale!

PRO100 - High Build 100% Epoxy - 3 Gallon BATCH / CRADLE KIT

$214.99 $255.15

PRO100 is a two component 100% (+/- 1%) Good chemical resistance. Use when high build, colorfast, impact resistant floor is desired. Pigmented only. Recommended for a high build basecoat on concrete or masonry. Product is suitable in many chemical exposure environm..

Ordering

Customers

Account

Get Help