ALL KITS ON SALE! Save Hundreds! Large Project? Request a Quote.
  • HP44 Polyaspartic Top Coat

HP44 Polyaspartic Top Coat

HP44 is a user friendly, high performance polyaspartic urethane top coat that leaves a beautiful gloss finish without the orange peel texture! HP44 is a two component high solids polyaspartic clear topcoat with excellent chemical resistance, UV stabi ...
  • $0.00

Available Options

HP44 is a user friendly, high performance polyaspartic urethane top coat that leaves a beautiful gloss finish without the orange peel texture! HP44 is a two component high solids polyaspartic clear topcoat with excellent chemical resistance, UV stability, abrasion resistance and hardness. This material is intended to be used as a high gloss topcoat over paint chips, decorative broadcasts or colored quartz broadcasts to provide an infinite array of color schemes or patterns. HP44 is designed with a user friendly 1:1 (by volume) mix ratio and has a longer working time than most polyaspartic coatings.

COVERAGE PER GALLON: 130-200 square feet per gallon (typical)

RECOMMENDED FOR: Topcoat metallic epoxy, flake systems, and may others. HP44 is suited for many industrial, commercial and residential applications. It is an excellent choice for garage floors, kitchens, countertops, restrooms, warehouses, laboratories, cafeterias and retail locations.

CURE SCHEDULE: (70°F) (70% relative humidity)
Pot life (to gel) – (150 gram mass)………………....greater than 2 hour (Actual usable working time is approximately 10-20 minutes, depending on environmental conditions and volumes)
Tack free (dry to touch)………………...……………………4-8 hours
Recoat or topcoat.....…………….……..…..............................6-9 hours
Light foot traffic...………………………………................…24 hours
Full cure (heavy traffic)... …………………..……..…...........2 -7 days

APPLICATION TEMPERATURE:
50-90 degrees F with relative humidity below 85%

SOLIDS BY WEIGHT: 84% (+/- 3%)
SOLIDS BY VOLUME: 83% (+/-3%)
VOLATILE ORGANIC CONTENT:Less than 95 g/l
ODOR: Mild solvent odor
COLORS AVAILABLE: Clear – Gardner color 1-2
Pigment Packs available (contact sales staff for details) RECOMMENDED FILM THICKNESS:
8-12 mils wet (when applying directly to concrete, precautions should be taken to properly prepare the substrate and the moisture content of the substrate should be tested. Do not apply to damp surfaces.)
COVERAGE PER GALLON: 130-200 square feet per gallon (typical)
PACKAGING INFORMATION: 2 gallon kit, 10 gallon kit, 100 gallon kit (net approximately)
MIX RATIO: 1:1 by volume
SHELF LIFE: 6 months in unopened containers
FINISH CHARACTERISTICS: Gloss (>80 at 60 degrees)
COMPRESSIVE STRENGTH: 11,500 psi @ ASTM D695
TENSILE STRENGTH: 3,800 psi @ ASTM D638
ULTIMATE ELONGATION: 2.4%
HARDNESS: Shore D= 55-60
ABRASION RESISTANCE: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 15 mg loss
VISCOSITY: Mixed = <500 centipoise (typical)
DOT CLASSIFICATIONS: Part A “not regulated” Part B “UN1993, FLAMMABLE LIQUID N.O.S., (CONTAINS XYLENE, ETHYLBENZENE), 3, PGIII”