PS100 is a two component 100% solids polyaspartic aliphatic urethane seamless binder for broadcast systems. Mix metallic pigment into PS100 to create a beautiful, deep, 3D surface. This material can be used with dried colored sand mixtures to provide an infinite array of color schemes or patterns.&n..

High Performance Polyaspartic Sealer / 107 – 160 square feet per gallon  HP90 is a two component 90% solids polyaspartic aliphatic polyaspartic sealer. This material can be used as the base coat and the topcoat over paint chip decorative broadcasts or colored sand broadcasts, and a metallic..

PC66 Polyaspartic Coating / 200-800 square feet per gallon / 2 to 8 mils. PC66 is a solvent based two component 66% solids polyaspartic aliphatic urethane clear coating. PC66 has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clear gardner color. ..

Own a high traffic business and can't shutdown? Need a counter, bar top, or floor that can be put down and within 4 hours or faster is ready for your high demanding customers? This kit will save time and money.  We highly recommend ordering a sample kit to get familiar with the speed of the cur..

Pigment for our polyaspartic urethanes. Adding pigment to any urethane is always a great idea because the color stabilization of urethanes are superior. See below for how much you need per product.1/2 Pint:PC66 - Add 1/2 pint to a 2 gallon kit of PC66PC85 - Add 1/2 pint to a 1.5 gallon kit of PC85HP..

PC85 / Polyaspartic Coating / 200-800 sq. ft. per gallon @ 8 to 2 mils. Used when a fast cure time is needed.  • Low Odor• Extremely Quick Cure Times• Excellent Abrasion, Chemical, and UV Resistance• Clear• High Gloss FinishPRODUCT DESCRIPTION:PC85 is a solvent based two component 85% solids po..

High Performance Polyaspartic Sealer / Binder / 80 – 160 square feet per gallon at 16 to 8 mils. 95% Solids (Clear) Polyaspartic. Can be used as binder for a metallic epoxy system, or a seal coat. Recommended when a fast cure time, extra heat and abrasion resistance is needed. CURE SCHEDULE:&nb..