Spring is here! Sale Going On Now! Ends 04/01/24! Call or start a chat today! Large Project? Request a Quote.
  • PTP100 Epoxy Primer

PTP100 Epoxy Primer

PTP100 Epoxy Primer is a Clear - two component 100% solids epoxy mortar primer designed for use as the base coat when installing a power troweled epoxy floor overlay. This product helps reduce application time and effort while providing excellent adh ...
  • $0.00

Available Options

PTP100 Epoxy Primer is a Clear - two component 100% solids epoxy mortar primer designed for use as the base coat when installing a power troweled epoxy floor overlay. This product helps reduce application time and effort while providing excellent adhesion between the substrate and epoxy overlay. 

Coverage Rate: 160 to 267 sq ft per gallon @ 6 to 10 mils.

Recommended for priming cement and concrete substrates before an epoxy mortar overlay installation. 
NOT RECOMMENDED FOR: Immersion applications for all acids and chemicals. For acids, use our novolac urethane slurry system. Talk to a Spartan Expert for more information. 


CURE SCHEDULE (70 Degrees F)

Pot Life (1 1/2 Gallon): 20 to 30 Minutes 
Tack Free (Dry to Touch): 4 to 6 Hours 
Topcoat: Immediately (see application or ask us)
Light Foot Traffic: N/A
Full Cure (Heavy Traffic): 2 to 7 Days 
Application Temperature: 50-90 degrees F with relative humidity below 90%


SOLIDS BY WEIGHT:100%
VOLATILE ORGANIC CONTENT:Zero pounds per gallon
COLORS AVAILABLE: Amber clear
RECOMMENDED FILM THICKNESS: 6-10 mils
COVERAGE PER GALLON: 160-267 sq. ft. @ 6-10 mils
PACKAGING INFORMATION 3 gallon and 15 gallon kits: (3 gallon kit= 2.7 gallons; 15 gallon kit= 13.6 gallons) (volumes approximate)
MIX RATIO: The mix ratio is two parts A to one part B by volume (8.0# part A to 4.0# part B) (volumes approximate)
SHELF LIFE: 1 year in unopened containers
FLEXURAL STRENGTH: 10,800 psi @ ASTM D790
COMPRESSIVE STRENGTH: 8,150 psi @ ASTM D695- 1/2” x 1/2” bars
TENSILE STRENGTH: 6,800 psi @ ASTM D638
ADHESION: 340 psi @ elcometer (concrete failure, no delamination)
ULTIMATE ELONGATION:3.6%
ELEVATED TEMP. RESISTANCE: No slip or flow at 158°F (mil-D-3134J sec 4.6.3.1)
HARDNESS:Shore D= 77
GARDNER VARIABLE IMPACTOR:Gardner impact, direct and reverse= 60 in. lb. (passed)
VISCOSITY: Mixed = 600-800 cps (typical)
DOT CLASSIFICATIONS:
Part A not regulated
Part B “FLAMMABLE LIQUID N.O.S., 8, UN1993, PGIII”
PRIMER: None required
TOPCOAT: Epoxy mortar power trowel overlay (hand troweled overlays are also acceptable.)

Polymer Coatings Color Chart
  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over PTP100 Epoxy Primer

Total Reviews (0)
click here write review to add review for this product.


Tags: Primer